Summit Energy Systems Products

C200S ICHP: High­ pressure Natural Gas Microturbine

The Signature Series Microturbine provides reliable electrical/thermal generation from natural gas with ultra-low emissions.
  • Ultra­low emissions
  • One moving part – minimal maintenance and downtime
  • Patented air bearings – no lubricating oil or coolant
  • Integrated utility synchronization – no external switchgear(1)
  • Compact modular design allows for easy, low­cost installation
  • Multiple units easily combined – act as single generating source
  • Remote monitoring and diagnostic capabilities
  • Proven technology with tens of millions of operating hours
  • Various Factory Protection Plans available
Expandable
Can be paralleled up to 30MW of power

specifications

  • Rating: 200 kW
  • Electrical Efficiency LHV: 33%
  • Combined Heat And Power Efficiency: Up to 90%
  • Voltage: 400-480 VAC
  • Frequency: 50/60 Hz, Grid Connect
  • Electrical Service: 3-Phase, 4-Wire
  • Width: 3.0 m (117 in)
  • Depth: 2.5 m (100 in)
  • Height: 3.8 m (148 in)
  • Weight: Grid Connect – 6,000 kg (13,200lbs); Dual Mode – 6,700 kg (14,700 lbs)
  • Net Heat Rate LHV: 10.9 MJ/kWh (10,300BTU/kWh)
  • Exhaust Temperature: 280 ºC (535ºF)
  • Exhaust Gas Flow: 1.3 kg/s (2.9 lbm/s)
  • Compatible Fuels: Pipeline Natural Gas

NOTES
1. Nominal full power performance at ISO conditions: 59°F, 14.696 Asia, 60% RH
2. Height dimensions are to the roofline. Exhaust outlet can extend up to 9.5 inches above the roofline.
3. Specifications based on high pressure natural gas systems. Values may vary with other fuel types.

Specifications are not warrantied and are subject to change without notice.

Find out more about Summit Energy Systems
conservation and production

Take the power